Qlogic 12000 Series Reference Manual page 57

dhcpEnable
Enable the DHCP client for this system.
Syntax:
dhcpEnable
Options:
None.
Sample Output:
MasterMM202-> dhcpEnable
DHCP is enabled
NOTES: Enables the DHCP client subsystem, requests a DHCP lease, and then
configures the interface with the lease data from the server,
dhcpDisable
Disable the DHCP client and release any acquired IP address
Syntax:
dhcpDisable
Options:
None.
Sample Output:
MasterMM202-> dhcpDisable
DHCP is disabled
NOTES: Any DHCP-acquired IP address will be released. The interface will then
be configured to the default static values from the current bootline.
dhcpShow
Display DHCP client information.
Syntax:
dhcpShow [-v]
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-49