Qlogic 12000 Series Reference Manual page 128

Switch Command Line Interface
Groups and Commands
ismPortQsfpInfo
Displays information from installed Quad Small Form-factor pluggable (QSFP) cables
Syntax:
ismPortQsfpInfo [scope] [output option]
Options:
scope
leafname, portname, or all
output option
-verbose = display multi-line output
Sample Output:
-> ismPortQsfpInfo L101 -verbose
NOTE:
ismChassisBounce
Bounce enabled ports for an entire chassis.
Syntax:
ismChassisBounce
Options:
None.
Sample Output:
-> ismChassisBounce
1-120
The Scope argument is case-sensitive and should adhere to the
following formats:
all = display info for all installed QSFPs in chassis
Lxxx = display info for all installed QSFPs on leaf xxx
LxxxPyy = display info for QSFP installed on leaf xxx, port yy
Cableyy = display info for QSFP installed on port yy (12300
only)
QSFP information may not be available for DDR hybrid cable
assemblies. For 0.5 meter cables, the length may be reported as
"0 meter".
D000103-000 E