Qlogic 12000 Series Reference Manual page 139

snmpUsrSec
Configure and display SNMP V3 users.
Syntax:
snmpUsrSec [add | show | edit | delete] [name] [-a algo
[key]]
Options:
add
add an entry to the V3 user table.
show
show entries in the V3 user table.
edit
modify an entry in the V3 user table.
delete
remove an entry in the V3 user table.
-a
authentication algorithm and key. Options: MD5, SHA, NONE. Passphrase is required
unless NONE is specified.
Sample Output:
-> snmpUsrSec
User : initialmd5
Auth : MD5
Auth Key: 0x047b473f93211a17813ce5fff290066b
Priv : NONE
User : initialsha
Auth : SHA
Auth Key: 0x1c8cbd687fb0f0a22ddd24315db0d84c09eb5ff3
Priv : NONE
User : initialnone
Auth : NONE
Priv : NONE
NOTE:
D000103-000 E
Handles configuration and display of SNMP v3 users. Supported
authentication algorithms are: NONE, MD5, and SHA. A passphrase
is required for all except the NONE algorithm. No privacy algorithms
are currently supported.
Switch Command Line Interface
Groups and Commands
1-131