Qlogic 12000 Series Reference Manual page 96

Switch Command Line Interface
Groups and Commands
smRestorePriority
Restore normal priorities from elevated states for the SM, BM, and PM.
Syntax:
smRestorePriority [sm | bm | pm | all]
Options:
sm
Restore normal SM priority
bm
Restore normal BM priority
pm
Restore normal PM priority
all
Restore normal priorities for the SM, BM and PM.
Sample Output:
-> smRestorePriority
NOTES: This command restores the normal priorities of various subnet managers
after they have elevated their priority following a failover. Issuing this command
allows the 'unsticking' of a sticky failover. Issuing this command without arguments
will restore the normal priorities of the SM, BM, and PM.
smResetConfig
Resets the XML configuration for the embedded subnet manager (ESM) to factory defaults. This
command is only available on the Master chassis management card.
Syntax:
smResetConfig [-noprompt]
Options:
-noprompt
proceed with a configuration reset without a confirmation prompt.
Sample Output:
-> smResetConfig
Proceed with configuration reset? [N] y
Default XML configuration file has been generated.
1-88 D000103-000 E