Chassis - Qlogic 12000 Series Reference Manual

Switch Command Line Interface
Groups and Commands

Chassis

hwCheck
Runs a system check at the chassis level and returns current hardware status.
Syntax:
hwCheck
Options:
[n - 0=default, 1=verbose]
Sample Output:
-> hwCheck
Chassis hardware status: GOOD
NOTES: Returns OK or provides detailed status/warning/error information. If an
error/warning is detected, this command automatically provides verbose
information.
hwMonitor
Displays current port states, fan speeds, temperatures, and voltages.
Syntax:
hwMonitor [slot] [onepass]
Options:
[slot]
Slot number to display. 0 for current slot of the management board.
[onepass]
Display the current values and exits. Do not continuosly monitor.
1-32 D000103-000 E