Qlogic 12000 Series Reference Manual page 24

Switch Command Line Interface
Groups and Commands
rcmd
Creates I/O terminal to local cards.
Syntax:
rcmd [hostName]
Options:
hostName
The name of the device to connect.
Sample Output:
-> rcmd Slave
NOTES: This command allows users to open a terminal to local I/O devices within
the chassis. The command rcmd is an alias of rlogin. See also hostShow.
resetCard
Reboot a specific slot in the chassis.
Syntax:
resetCard n [now]
Options:
n
Chassis slot number.
now
No prompt before resetting the card.
Sample Output:
-> resetCard 101 now
NOTES: If you reset the switch you are connected to you will have to reconnect.
You can find out the valid slots for this device with the 'showInventory' command.
1-16 D000103-000 E