Qlogic 12000 Series Reference Manual page 64

Switch Command Line Interface
Groups and Commands
Options:
[-key feature]
Displays information for a particular feature.
Sample Output:
-> showCapability
fwPush: 1
showLastScpRetCode
Display the return code from the last SCP Firmware Push.
Syntax:
showLastScpRetCode slot | -all
Options:
slot
The slot number in the chassis.
-all
All slots in the chassis.
Sample Output:
-> showLastScpRetCode 101
SCP: Slot 101 Last Exit Code: 0: Success
NOTES: This allows for automated systems to determine if a SCP firmware push
was successful or not.
fwVersion
Displays the firmware versions for a unit.
Syntax:
fwVersion [slot]
Options:
slot
Slot number.
1-56 D000103-000 E