Qlogic 12000 Series Reference Manual page 66

Switch Command Line Interface
Groups and Commands
Options:
[slot]
The slot number using the next boot image.
[-i index]
The index of the boot image to be used next.
[-alternate]
Chooses the alternate image to be used next.
[-version version]
Chooses a specific version to be the image to be used next.
[-noprompt]
Displays the current configuration only.
Sample Output:
MasterMM202-> bootSelect 201
Currently installed firmware versions
index : alias : version
--------------------------
*# 1 : image1 : 5.0.0.0.73;
2 : image2 : 5.0.0.0.72;
* - indicates Primary image (will run at next reboot)
# - indicates Active image
Default boot image index = 1
...
NOTES: This command allows the user to set the next boot image for the device.
A '*' next to the image entry indicates the currently selected bootimage. A '#'
indicates the currently active boot image.
1-58 D000103-000 E