Qlogic 12000 Series Reference Manual page 42

Switch Command Line Interface
Groups and Commands
Options:
[-d]
Show the default Node Name for this unit.
Sample Output:
-> showIBNodeDesc
IB Node (SMA) Description is = QLogic 12300 GUID=0x00066a00030001xa
NOTES: Entering this command with no parameters displays the current Node
Description. The -d option will display the unit's default value.
setIBNodeDesc
Changes the IB Node (SMA) Description.
Syntax:
setIBNodeDesc "New Node String"
Options:
None.
Sample Output:
-> setIBNodeDesc "QLogic 12300 GUID=0x00066a00da000"
IB Node (SMA) Description successfully changed to = QLogic 12300
NOTES: New node name must be enclosed in quotes. Node name must be less
than 64 characters.
setIBNodeDescFormat
Changes the IB Node (SMA) description format modifier.
Syntax:
setIBNodeDescFormat [format]
Options:
[format]
Use 0 or 1 to set the format
1-34 D000103-000 E