Qlogic 12000 Series Reference Manual page 38

Switch Command Line Interface
Groups and Commands
IpoIbAddressShow
Displays the IpoIb IP address and associated netmask.
Syntax:
IpoIbAddressShow
Options:
None.
Sample Output:
-> IpoIbAddressShow
NOTES: IPoIB must be enabled to display these fields.
IpoIbAddressSet
Change the IpoIb IP address and associated network mask.
Syntax:
IpoIbAddressSet -h ipaddress -m netMask
Options:
[-h ipaddress]
the new IP address in dotted notation format 'xxx.xxx.xxx.xxx'.
[-m netMask]
network mask. (in hexidecimal format).
Sample Output:
-> IpoIbAddressSet -h 123.45.6.789
NOTES: IPoIB must be enabled to display these fields.
IpoIbAddressSetIPv6
Changes the IPoIB IPv6 address and netmask.
Syntax:
IpoIbAddressSetIPv6 <ipv6Address/netMaskLen>
1-30 D000103-000 E