Qlogic 12000 Series Reference Manual page 75

Sample Output:
-> smShowLidMap
----------------------------------------------------------------------------------
SM is currently in the MASTER state, with Topology Pass count = 341
----------------------------------------------------------------------------------
Lid 0x0001: guid = 0x00066a000600013c, pass = 341, QLogic 12300 GUID=0x00066a00da000100
172.26.2.2 Spine 1, Ch
Lid 0x0002: guid = 0x00066a0007000170, pass = 341, QLogic 12300 GUID=0x00066a00da000100
172.26.2.2 Leaf 4, Chi
Lid 0x0003: guid = 0x00066a100600013c, pass = 341, QLogic 12300 GUID=0x00066a00da000100
172.26.2.2 Spine 1, Ch
Lid 0x0006: guid = 0x00066a00a0000248, pass = 229
Lid 0x0007: guid = 0x00066a01a0007116, pass = 341, st149
Lid 0x0008: guid = 0x0000000000000000, pass = 0
Lid 0x0028: guid = 0x0000000000000000, pass = 0
Lid 0x002a: guid = 0x0000000000000000, pass = 0
NOTES: Use this command to display the LID-to-port GUID map of the subnet
manager. This command is not available unless the subnet manager is in the Master
mode.
smShowMaxLid
Display the highest LID allocated by the subnet manager.
Syntax:
smShowMaxLid
Options:
None.
Sample Output:
-> smShowMaxLid
The maximum LID is 0x0138
NOTES: Use this command to display the highest LID allocated by the subnet
manager. This command is not available unless the subnet manager is in the Master
mode.
smSwitchLifetime
Allows the user to display/dynamically set the default switch lifetime of the subnet manager.
Syntax:
smSwitchLifetime [lifetime}
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-67