Qlogic 12000 Series Reference Manual page 26

Switch Command Line Interface
Groups and Commands
passwd
Change users password(s).
Syntax:
passwd [username]
Options:
[username]
Name of the user whose password needs to be changed.
Sample Output:
-> passwd operator1
User password changed successfully
NOTES: Allows the modification of the user's password.
userAdd
Add a user account.
Syntax:
userAdd [role] [username] [password]
Options:
[role]
Can be either admin or operator.
[username]
The name of the user to be added.
[password]
Optional password. If not supplied the default password for that role is used.
Sample Output:
-> userAdd admin Bob
User added: Bob
Password is set to the default password for this role: admin
1-18 D000103-000 E