Qlogic 12000 Series Reference Manual page 15

Use the Up and Down arrow keys to browse command history, Left and Right arrow
keys to edit the current command and the Tab key for tab completion of a command.
Two alternate key bindings exist for the backspace and delete keys. If these keys
are not responding as expected use the swapBsDel command to swap the
bindings.
Commands are grouped into subcategories. To list the commands in a subcategory
type in the category heading. Category headings are identified by starting with a
capital letter. For example, to list all the commands that handle log configuration
type Log.
In each help description, items in brackets(e.g. [<command>] in this help
description) represent optional parameters. User selectable input is indicated by
items within the '<' and '>' symbols(e.g. <command>). Text outside the '<' and '>'
characters is the actual text that needs to be entered. When there is more than one
choice, the options are specified within '{' and '}' characters, where the options are
separated by '|' characters.
list
Displays a list of all valid commands.
Syntax:
list [all] [group] [-noprompt] [-verbose]
Options:
all
List the commands for all groups.
group
Displays a list of commands for a particular group
-noprompt
Displays a list of the command groups only.
-verbose
Print full help for each command, instead of summary.
Sample Output:
list
List of Valid Commands:
General General commands for user management and CLI configuration.
Deprecated These commands have been deprecated
Network Snmp configuration commands.
Firmware Update firmware and display current revision levels.
Log Log file display and configuration
IbSwitchInfo InfiniBand port configuration and statistics
TimeManagement Display and configure the system time
Snmp Snmp configuration commands.
Type the name of the group you want to list or return to exit:
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-7