Qlogic 12000 Series Reference Manual page 48

Switch Command Line Interface
Groups and Commands
Options:
None.
Sample Output:
-> routeShow
ROUTE NET TABLE
destination gateway
----------------------------------------------------------------------------
0.0.0.0 172.26.0.1
0.0.0.0 172.26.3.35
127.1.0.0 127.1.1.2
127.2.0.0 127.2.0.1
172.26.0.0 172.26.3.35
172.26.0.0 172.26.3.19
----------------------------------------------------------------------------
ROUTE HOST TABLE
destination gateway
----------------------------------------------------------------------------
127.0.0.1 127.0.0.1
----------------------------------------------------------------------------
ping
Send ping packets to a specified host.
Syntax:
ping [ipAddress] [packetCount]
Options:
[IpAddress]
The IP address of the network host to ping.
[packetCount]
The number of packets with which to ping the host (default is 5).
1-40
flags Refcnt Use
3 2 18966
3 0 0
101 0 0
101 0 0
101 0 0
101 -1 0
flags Refcnt Use
5 3 14209
Interface
sbe0
sbe0
sbe1
sbe1
sbe0
sbe0
Interface
lo0
D000103-000 E