Qlogic 12000 Series Reference Manual page 85

smLogMode
Displays or dynamically sets the Subnet Manager logging mode.
Syntax:
smLogMode [<logmode>]
Options:
logmode
logging mode 0 or 1
Sample Output:
-> smLogMode 1
NOTES:
0 - use normal logging levels
1 - logging is quieted by downgrading the majority of fatal, error, warn and infiniinfo
log messages to level
3 (INFO) and only outputting user actionable events when LogLevel is 1 or 2.
The Subnet manager must be running to use this command. Changes made with
this command will only affect the currently running SM, and will will be forgotten if
the FM is restarted or the chassis is rebooted. To make persistent changes edit the
FM XML config file.
smLogMask
Displays or dynamically sets the Subnet Manager logging mask for a specific subsystem.
Syntax:
smLogMask <subsystem> [<mask>]
Options:
subsystem
The Fabric Manager (FM) subsystem.
mask
The bit mask needed for logging to enable.
Sample Output:
-> smLogMask SM
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-77