Qlogic 12000 Series Reference Manual page 11

SubnetManagement:
InfiniBand subnet manager configuration and management.
Log:
Provides commands for viewing log files as well as configuring logging
parameters.
KeyManagement:
License key management.
IbSwitchInfo:
Provides commands for displaying InfiniBand (IB) statistics for all IB ports on
the switch, as well as for configuring port statistic thresholds.
TimeManagement:
Provides commands for retrieving and setting the current system time, as well
as commands for setting the time zone and daylight saving time parameters.
Snmp:
Provides commands for configuring SNMP trap destinations and security
parameters required to access the switch from an SNMP manager.
CaptureInfo:
Provides commands for capturing switch-specific information for the purposes
of analysis and debugging.
To list commands within a functional group, simply type in the functional group name.
For example, to list all of the firmware commands, type list Firmware. The system
displays information similar to the following:
-> list Firmware
fwUpdateSlot
fwUpdateChassis
fwListFiles
fwShowUpdateParams
fwSetUpdateParams
showCapability
showLastScpRetCode Display the return code from the last SCP Firmware Push
fwVersion
bootQuery
bootSelect
D000103-000 E
Update units firmware
Update units firmware
List the contents of the firmware ramdisk
Display firmware default update parameters
Configure firmware default update parameters
Display the capabilities/features
Display Firmware revisions
Query boot image information
Change boot selection
Switch Command Line Interface
Commands and Functional Groups
1-3