Qlogic 12000 Series Reference Manual page 52

Switch Command Line Interface
Groups and Commands
Sample Output:
-> showChassisIpv6Addr
autoConfIPv6Enable
Enables IPv6 address autoconfiguration.
Syntax:
autoConfIPv6Enable
Options:
None.
Sample Output:
-> autoConfIPv6Enable
NOTES: This command allows prefix learning from attached routers, and does not
affect link-local or manually configured addresses.
autoConfIPv6Disable
Disables IPv6 address autoconfiguration.
Syntax:
autoConfIPv6Disable
Options:
None.
Sample Output:
-> autoConfIPv6Disable
NOTES: Prevents prefix learning from attached routers, and does not affect
link-local or manually configured addresses.
autoConfIPv6Show
Displays IPv6 address autoconfiguration setting(s).
Syntax:
autoConfIPv6Show
1-44 D000103-000 E