Qlogic 12000 Series Reference Manual page 20

Switch Command Line Interface
Groups and Commands
Options:
msg
Message (Note: the message text must be encapsulated in quotes "".
Sample Output:
-> broadcast "The system will be rebooted in 5 minutes."
NOTES: Writes the supplied message to all other active CLI sessions. The message
to be written must be encapsulated in quotes, and non-empty.
swapBsDel
Swaps the backspace and delete character key bindings.
Syntax:
swapBsDel
Options:
None.
Sample Output:
-> swapBsDel
NOTES: Terminals may bind the backspace and delete key bindings differently.
This command swaps two commonly used bindings, which allow the user to use
the backspace and delete keys properly without having to adjust their terminal
settings. Backspace and delete swapping is persistently maintained per user (i.e.
each login account can have a separate binding).
setTermWidth
Change the terminal width for text formatting purposes.
Syntax:
setTermWidth width
Options:
width
Width of the user's terminal window. Minimum width is 20 characters.
1-12 D000103-000 E