Qlogic 12000 Series Reference Manual page 97

smShowConfig
Displays the XML configuration file.
Syntax:
smShowConfig [-infoOnly | -contentOnly] [-noprompt]
Options:
-infoOnly
Displays the timestamp for the XML configuration file.
-contentOnly
Displays the contents of the XML configuration file.
-noprompt
Do not prompt to 'Continue' for each page of displayed output.
Sample Output:
-> smShowConfig
<!-- Common FM configuration, applies to all FM instances/subnets -->
<Common>
<!-- Various sets of Applications which may be used in Virtual Fabrics -->
<!-- Applications defined here are available for use in all FM instances. -->
<!-- Additional Applications may be defined here or per FM instance. -->
<!-- Applications specified per FM instance will add to -->
<!-- instead of replace these Application definitions. -->
<Applications>
<!-- Each Application can have one or more ServiceIDs and/or MGIDs. -->
<!-- These will be matched against PathRecord and Multicast SA queries -->
<!-- so that the returned SLID/DLID, PKey, SL, etc are appropriate for -->
<!-- the Virtual Fabric(VF) which contains the application(s). -->
<!-- Every Application must have a unique <Name> -->
<!-- The name must be unique among all Application names within an -->
<!-- FM instance. -->
<!-- When defined at Common level must be unique within all instances. -->
<!-- The name is limited to 64 characters and is case sensitive. -->
<!-- ServiceIDs are 64 bit values which identify applications within the -->
<!-- PathRecord query and are typically used within the InfiniBand -->
<!-- Communication Manager (CM) protocol to identify the application for -->
Continue? [Y]
...
NOTES: With no arguments, the XML configuration file timestamp and contents will
be displayed, one screen at a time. Enter Y or Enter at the prompt to continue
displaying command output. Enter N at the prompt to terminate the output. The
-infoOnly and -contentOnly flags will limit the information displayed. Use the
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-89