Qlogic 12000 Series Reference Manual page 70

Switch Command Line Interface
Groups and Commands
NOTES: The sweep rate determines how often the subnet manager scans the fabric
for changes and events. The subnet manager must be running to display or
dynamically set the sweep rate of the embedded subnet manager. Changes to
sweepRate made with the smSweepRate command will only affect the subnet
manager that is currently running and will not be persistent.
smForceSweep
Force a fabric sweep by the embedded subnet manager.
Syntax:
smForceSweep
Options:
None.
Sample Output:
-> smForceSweep
NOTES: Use this command to force a sweep by the subnet manager.
bmForceSweep
Force a fabric sweep by the embedded baseboard manager.
Syntax:
bmForceSweep
Options:
None.
Sample Output:
-> bmForceSweep
NOTES: Use this command to force a sweep by the baseboard manager.
smShowGroups
Display multicast group information in the embedded subnet manager.
Syntax:
smShowGroups [-h]
1-62 D000103-000 E