Qlogic 12000 Series Reference Manual page 81

Valid Values for TClass are 0 to 0xff
smGidPrefix
Set the Subnet Prefix (default=0xfe80000000000000).
Syntax:
smGidPrefix [prefix]
Options:
None.
Sample Output:
-> smGidPrefix
Subnet Prefix: 0xfe80000000000001
NOTES: Use this command to set the subnet prefix of the SM. The SM must be
offline and the subnet prefix value is 8 byte hex. The subnet manager must be
running to display default multicast group information.
smSubnetSize
Set/display the subnet size for the subnet manager.
Syntax:
smSetSubnetSize
Options:
None.
Sample Output:
-> smSubnetSize
NOTES: Use this command to tune the SM to handle the configured fabric size.
The subnet manager must be running to display subnet size information.
smTopoErrorThresh
Set/display the error threshold for a topology sweep.
Syntax:
smTopoErrorThresh
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-73