Qlogic 12000 Series Reference Manual page 104

Switch Command Line Interface
Groups and Commands
logShowConfig
Display the current log configuration settings.
Syntax:
logShowConfig
Options:
None.
Sample Output:
Log Configuration for Slot 101:
------------------------------
Configurable devices
index : name : |D|F|E|A|W|P|C|I|P|N|1|2|3|4|5|
----------------------------------------------------
1 : Ram : |X|X|X|X|X| | | | |X| | | | | |
3 : Console : |X|X|X|X|X| | | | |X| | | | | |
5 : Syslog : |X|X|X|X|X| | | | |X| | | | | |
Configurable presets
index : name : state
------------------------------
1 : Dump : Enabled
2 : Fatal : Enabled
3 : Error : Enabled
4 : Alarm : Enabled
5 : Warning : Enabled
6 : Partial : Disabled
7 : Config : Disabled
8 : Info : Disabled
9 : Periodic : Disabled
15 : Notice : Enabled
10 : Debug1 : Disabled
11 : Debug2 : Disabled
12 : Debug3 : Disabled
13 : Debug4 : Disabled
14 : Debug5 : Disabled
logSyslogTest
Test the Syslog configuration.
Syntax:
logSyslogTest [severityType]
1-96 D000103-000 E