Qlogic 12000 Series Reference Manual page 58

Switch Command Line Interface
Groups and Commands
Options:
-v verbose output
Sample Output:
MasterMM202-> dhcpShow
Client state = BOUND
Assigned IP address: 172.26.3.35
Client subnet mask: 255.255.240.0
DHCP server: 172.26.1.20
Default IP router: 172.26.0.1
Client lease duration: 518400 secs (421299 remaining)
dnsParamsShow
Displays the stored domain named server (DNS) parameters.
Syntax:
dnsParamsShow
Options:
None.
Sample Output:
MasterMM202-> dnsParamsShow
DNS Resolver : Enabled
DNS Server Address : xxx.xxx.xxx.xxx
Local Domain Name : st.qlogic.com
NOTE:
This command retrieves the stored configuration parameters used for
domain name resolution.
dnsParamsSet
Changes the DNS configuration parameters.
Syntax:
dnsParamsSet [-s <ipaddress>] [-d <domain name>] [-e <1
or 0>]
1-50 D000103-000 E