Qlogic 12000 Series Reference Manual page 90

Switch Command Line Interface
Groups and Commands
sm1xLinkMode
Displays how the subnet manager handles 1x links.
Syntax:
sm1xLinkMode
Options:
None.
Sample Output:
-> sm1xLinkMode
Mode is 'off'. Erroneous 1x links will be activated normally.
-> sm1xLinkMode ignore
-> sm1xLinkMode
Mode is 'ignore'. Erroneous 1x links will not be activated.
NOTES: When set to 'off', all links come up normally. When set to 'ignore', links that
only come up at 1x (when they were enabled for a higher rate) are forced down.
These downed ports can be queried to aid debugging errors in the fabric. The subnet
manager must be running to display this information.
smTrapThreshold
Display the port auto-disable urgent trap threshold value (in minutes).
Syntax:
smTrapThreshold
Options:
None.
Sample Output:
-> smTrapThreshold
Trap Threshold is 0 (disabled).
-> smTrapThreshold 20
-> smTrapThreshold
Trap Threshold is 20 traps/minute.
NOTES: When enabled, ports generating urgent traps at a rate higher than the
threshold will be disabled. This value can range from 10 to 100 traps/minute. Set
1-82 D000103-000 E