Qlogic 12000 Series Reference Manual page 71

Options:
-h
Display the host name as part of the output.
Sample Output:
-> smShowGroups
Multicast Groups:
join state key: F=Full N=Non S=SendOnly Member
0xff12601bffff0000:00000001ffffd5bb (c001)
qKey = 0x00000000 pKey = 0xFFFF
0x0011750000ffd5bb F
0xff12401bffff0000:00000000ffffffff (c000)
qKey = 0x00000000 pKey = 0xFFFF
0x00066a01a0007116 F
0x00066a01a000015d F
0x00066a00a000035a F
0x0011750000ffd9c2 F
0x0011750000ffda4a F
NOTES: Use this command to display multicast group information in the subnet
manager. This command is not available unless the subnet manager is in the Master
mode.
smShowServices
Display subnet administration service records of the subnet manager.
Syntax:
smShowServices
Options:
None.
D000103-000 E
mtu = 4 rate = 3
mtu = 4 rate = 3
0x0002c902003fffd5 F 0x00066a00a00001ac F
0x00066a00a00001a3 F 0x00066a00a00001dc F
0x0011750000ffd5c2 F 0x0011750000ffd664 F
0x0011750000ffd9f8 F 0x0011750000ffd5b9 F
0x0011750000ffd5bb F 0x0011750000ffd9de F
Switch Command Line Interface
Groups and Commands
life = 19 sl = 0
life = 19 sl = 0
1-63