Qlogic 12000 Series Reference Manual page 82

Switch Command Line Interface
Groups and Commands
Options:
None.
Sample Output:
-> smTopoErrorThresh 100
Set topology error threshold to:100
NOTES: Sets the maximum number of errors the SM may encounter during a sweep
before abandoning the sweep. The subnet manager must be running to display the
error threshold for a topology sweep.
smTopoAbandonThresh
Set/display the max consecutive times the SM can abandon a sweep due to too many errors.
Syntax:
smTopoAbandonThresh
Options:
None.
Sample Output:
-> smTopoAbandonThresh 3
Set topology sweep abandonment threshold to:3
NOTES: The subnet manager must be running to display this information.
smMaxRetries
Displays the maximum number of subnet manager receive retries
Syntax:
smMaxRetries
Options:
None.
1-74 D000103-000 E