Qlogic 12000 Series Reference Manual page 21

Sample Output:
-> setTermWidth 100
NOTES: Allows modification of the terminal width used for text formatting purposes.
Note that not all commands adhere to this setting. The minimum width is 20
characters.
getTermWidth
Displays the terminal width for text formatting purposes.
Syntax:
getTermWidth
Options:
None.
Sample Output:
-> getTermWidth
Current terminal width: 80 characters.
NOTES: Displays the terminal width used for text formatting purposes. Note that
not all commands adhere to this setting.
prompt
Set the CLI prompt (global for all active CLI sessions).
Syntax:
prompt str
Options:
str
The new prompt.
Sample Output:
prompt -> "12300->"
12300->
NOTES: This changes the prompt for all CLI sessions. The prompt may not exceed
11 characters and is not saved across reboots. If the prompt contains a space,
asterick, comma, parenthesis or semicolon it must be enclosed with double quotes
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-13