Qlogic 12000 Series Reference Manual page 105

Options:
-e
Send Error severity CSM test message to Syslog.
-w
Send Warning severity CSM test message to Syslog
-n
Send Warning severity CSM test message to Syslog.
Sample Output:
-> logSyslogTest -e
Currently configured Syslog host is: 0.0.0.0 port 514 facility 22
Syslog configuration has been tested
NOTES: This command tests the Syslog configuration by sending CSM message(s)
to registered Syslog servers.
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-97