Qlogic 12000 Series Reference Manual page 122

Switch Command Line Interface
Groups and Commands
ismSetPStatThresh
Modifies the port statistic thresholds.
Syntax:
ismSetPStatThresh field threshold
Options:
-field
The name of the port status threshold field.
-threshold
The numeric threshold value.
Sample Output:
-> ismSetPStatThresh portXmitData 0
successfully set port stat threshold portXmitData
1-114
3 portXmitPkts: data packets transmitted
4 portRecvPkts: data packets received
6 portSymbolErr: a 8B10B encoding violation, or a displarity
violation was detected
7 portLinkErrRecv: link error recovery process happened
successfully
8 portLinkDowned: link error recovery process failed
9 portRecvErr: errors received
10 portRecvRemPhysErr: remote physical errors received
12 portXmitDiscard: port transmit discards
13 portPKeyViolIn: PKey inbound was invalid
14 portPKeyViolOut: PKey outbound was invalid
15 portRawViolIn: raw inbound packet discarded
16 portRawViolOut: raw outbound packet discarded
17 portLocalLinkInteg: link integrity errors
18 portExcBufferOverrun: excessive buffer overrun errors
19 portRelayedVL15Dropped: remote VL15 packet was dropped
20 portLocalVL15Dropped: local VL15 packet was dropped
21 portNonSMPDropped: non SMP packet was dropped
D000103-000 E