Qlogic 12000 Series Reference Manual page 92

Switch Command Line Interface
Groups and Commands
Sample Output:
-> smPmBmStart
SM is enabled
PM is enabled
BM is enabled
FE is enabled
-> smPmBmStart disable
SM is enabled
PM is disabled
BM is disabled
FE is enabled
smShowRemovedPorts
Displays the ports that have been automatically removed from the fabric..
Syntax:
smShowRemovedPorts
Options:
None.
Sample Output:
-> smShowRemovedPorts
Disabled Ports:
Node 0x00066a0007000001: QLgoic 12300 GUID=0x00066a00da000001 Leaf 1,
Chip A
Port 12: Trap Threshold Exceeded
Port 23: 1x Link Width
NOTES: This displays ports that have been removed from the fabric automatically
by the SM, such as when a 1x link mode is set to 'ignore' or when a port has exceeded
its urgent trap threshold. This command is not available unless the subnet manager
is in Master mode.
smShowCounters
Display various statistics and counters maintained by the subnet manager.
Syntax:
smShowCounters
Options:
None.
1-84 D000103-000 E