Qlogic 12000 Series Reference Manual page 80

Switch Command Line Interface
Groups and Commands
Options:
clear
Clears all set options.
default
Enable the default set of options (i.e., def-mcgrp-create and dyn-pit).
def-mcgrp-create
Auto create default multicast group. If using only this option, dyn-pit will be disabled.
dyn-pit
Enable dynamic packet lifetimes for pathrecord queries. If using only this option,
def-mcgrp-create will be disabled.
Sample Output:
-> smOptionConfig dyn-plt
[dyn-plt] Dynamic packet lifetime support is enabled
NOTES: The subnet manager must be running to display the non-default modes of
operation.
smDefBcGroup
Displays the default multicast group configuration.
Syntax:
smDefBcGroup
Options:
None.
Sample Output:
-> smDefBcGroup
NOTES: The subnet manager must be running to display default multicast group
information.
Valid MTU values are 1(256), 2(512), 3(1024), 4(2048), and 5(4096)
Valid RATE values are 2(2.5GB), 3(10GB), 4(30GB), 5(5GB), 6(20GB),
7(40GB), 8(60GB), 9(80GB), 10(120GB)
Valid Values for SL are 0 to 0xF
Valid Values for QKEY are 0 to 0xFFFFFFFF
Valid Values for FlowLabel are 0 to 0xFFFFF
1-72 D000103-000 E