Qlogic 12000 Series Reference Manual page 18

Switch Command Line Interface
Groups and Commands
Options:
now
Does not prompt the user before rebooting.
-m
Reboot Master (local) Management Module 228 (non-disruptive).
slot n
reset specific device where n = slotNumber (disruptive).
-s
Reboot Slave (remote) Management Module 227.
-n
Reboot Slave (remote) management card only (non-disruptive)
all
Reboot All local devices (excludes -n/-m/-s).
Sample Output:
-> reboot
Disruptive reboot selected
Proceed with reboot? [N]
NOTES: You may reboot the local (Master) Managment Module or the remote
(Slave) Managment Module with one or multiple arguments.
Non-disruptive arguments will not interfere with switch traffic.
Providing the argument all performs disruptive reboot of all present Managment
Modules and cards.
If rebooting the local device from telnet, ssh, etc., you will have to reconnect after
rebooting.
Default (no arguments) reboots local device disruptively after prompt.
See also: 'resetCard', 'showInventory'.
killCliSession
Terminates an existing CLI session
Syntax:
killCliSession sessionNumber
Options:
sessionNumber
The sessionNumber that is returned from the
1-10
who command.
D000103-000 E