Qlogic 12000 Series Reference Manual page 54

Switch Command Line Interface
Groups and Commands
Syntax:
setDefaultRoute -h ipaddress
Options:
-h ipaddress
The default gateway IP address in dotted decimal format (xxx.xxx.xxx.xxx).
Sample Output:
setDefaultRoute -h 172.26.0.235
NOTES: This allows the user to configure the IP address for the default gateway
to route packets from the OOB management port to an external network.
arpShow
Displays the contents of the ARP table.
Syntax:
arpShow
Options:
None.
Sample Output:
-> arpShow
LINK LEVEL ARP TABLE
destination gateway
--------------------------------------------------------------------------
127.1.1.1 02:06:6a:ff:ff:fd
127.2.0.2 02:06:6a:ff:ff:fd
172.26.0.1 00:19:e8:a0:69:f9
172.26.3.35 00:06:6a:01:99:c8
--------------------------------------------------------------------------
hostShow
Displays a list of remote hosts names, internet address and alias(es).
Syntax:
hostShow
1-46
flags Refcnt Use
405 3 12121958
c05 2 71421
405 1 0
405 1 0
Interface
sbe1
sbe1
sbe0
lo0
D000103-000 E