Qlogic 12000 Series Reference Manual page 43

Sample Output:
-> setIBNodeDescFormat
Format = 0
NOTES: If the format is not specified, then the current format selection value is
displayed. When the format is 0, the SMA node description is in a verbose format.
When the format is one the format is brief. The brief format is more consistent with
the CLI/GUI Port Stat port naming.
fruInfo
Displays the EEProm contents.
Syntax:
fruInfo [slot|'-all']
Options:
[slot]
Slot that you wish to display EEProm contents. Defaults to 0 (chassis EEProm)
Sample Output:
-> fruInfo
xInfo_ChassisInfo:
RecType: 1
ReadOnly: 1
LogicalLen: 020
HdrChkSum: c6
ChassisGuid: 00066a000300012a
SlotCount: 1
SlotNumbers: 81
CmeAccess: 80
SlotNumber: 0 <-Record accessed via this slot
CmeAccessBits: 2
ProxyAccess: 0
LockDrivesCTR: 0
MechLock: 1
NodeCount: 0
...
NOTES: The '-all' parameter performs this command against all available slots for
the device.
D000103-000 E
LastRec: 0
RecordFormat: 2
(IB Mods in Chassis)
(pairs:ext0|Slt1)
(bits:ext0|Slt1|Cme)
(Access slot relative)
(Access slot relative)
(Clear to Remove interlock)
Switch Command Line Interface
Groups and Commands
LenMult: 0
RecLen: 14
1-35