Qlogic 12000 Series Reference Manual page 79

Sample Output:
-> smInfoKey
SM Key: 0x0000000000000001 (1 decimal).
NOTES: Use this command to set the SM key. SM must be offline and key value is
up to 8 byte hex. The subnet manager must be running to display the SMInfo key
value.
smMgmtKey
Set the subnet manager management key (portInfo) value.
Syntax:
smMgmtKey
Options:
None.
Sample Output:
-> smMgmtKey 0x11
SM management key: 0x0000000000000011 (17 decimal)
NOTES: Use this command to set the SM management key. SM must be offline
and mkey value is up to 8 byte hex. The subnet manager must be running to display
the SMInfo key value.
smOptionConfig
Use this command to configure support for non-default modes of operation.
Syntax:
smOptionConfig [clear | default | [def-mcgrp-create]
[dyn-plt]]
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-71