Qlogic 12000 Series Reference Manual page 91

the value to 0 to disable this feature. The subnet manager must be running to display
this information.
smAppearanceMsgThresh
Displays the threshold for appearance and disappearance messages.
Syntax:
smAppearanceMsgThresh
Options:
None.
Sample Output:
-> smAppearanceMsgThresh
Message Threshold is 0 (disabled).
-> smAppearanceMsgThresh 3
-> smAppearanceMsgThresh
Message Threshold is 3 messages/sweep.
NOTES: This command sets the threshold for the number of fabric appearance and
disappearance log messages that may be logged as NOTICEs per sweep by the
SM. A value of zero causes all such messages to be logged at the NOTICE level.
A value greater than zero will cause the priority of any subsequent messages to
be logged at the INFO priority. The subnet manager must be running to display this
information.
smPmBmStart
Allows the user to set/display whether performance manager and baseboard manager starts along with
the subnet manager.
Syntax:
smPmBmStart [enable] [disable]
Options:
enable
Enable the start of the PM and BM at SM start-up.
disable
Disable the start of the PM and BM at SM start-up.
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-83