Qlogic 12000 Series Reference Manual page 46

Switch Command Line Interface
Groups and Commands
Sample Output:
-> setSystemContact [contact string]
NOTES: If the system contact is not specified, the current system contact is
displayed.
setSystemName
Allows the user to set/show the chassis system name.
Syntax:
setSystemName [name]
Options:
[name]
System name string
Sample Output:
-> setSystemName [name string]
NOTES: If the system name is not specified, the current system name is displayed.
setSystemLocation
Allows the user to set/show the chassis system location.
Syntax:
setSystemLocation [location]
Options:
[location]
System location string
Sample Output:
-> setSystemLocation [location string]
NOTES: If the system location is not specified, the current system location is
displayed.
1-38 D000103-000 E