Qlogic 12000 Series Reference Manual page 72

Switch Command Line Interface
Groups and Commands
Sample Output:
-> smShowServices
******************************************************************
There is 1 Service Records
*********************************************************
Service ID = 0x1100D03C34834444
Service GID = 0xFE80000000000000:00066A000600013C
Service P_Key = 0x0000
Service Lease = infinite
Service Key =
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00
Service Name = QLogic Fabric Executive service Rev 1.1
Service Data 8 =
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00
Service Data 16 =
0x0000 0x0000 0x0000 0x0000
Service Data 32 =
0x0000 0x0000 0x0000 0x0000
Service Data 64 =
0x0000000000000000 0x0000000000000000
Service Expire Time = 0x0100000000000000
NOTES: The components(fields) of each service record are displayed. Each service
record is stored in a location identified by a 'Slot' number which is displayed before
any component of that Service Record. If a group of slots do not contain Service
Records, the first slot of the empty group is displayed as 'empty'. This command is
not available unless the subnet manager is in the Master mode.
smShowSubscriptions
Display event forwarding (subscription) table in the embedded subnet manager.
Syntax:
smShowSubscriptions
Options:
None.
1-64
0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00
0x0000 0x0000 0x0000 0x0000
0x00
0x00
D000103-000 E