Commands And Functional Groups - Qlogic 12000 Series Reference Manual

Switch Command Line Interface

Commands and Functional Groups

Administrator:
The CLI allows multiple users to be logged in simultaneously. However, some
commands will be locked to a user(s) if another user is executing the same
command.
Commands and Functional Groups
The list of available commands can be accessed by typing list. To keep the list
short, the commands are grouped into functional groups, which are:
General:
General commands for user management and CLI configuration.
Deprecated:
Commands that have been deprecated.
The Deprecated group contains CLI commands that have been replaced or
are to be removed. Please use the new command where appropriate.
Chassis:
Chassis management commands. (FRU info, fan/power supply state, etc).
Network:
Ethernet interface management commands.
Firmware:
Provides commands for updating the firmware via a File Transfer Protocol
(FTP) server or Secure Copy Protocol (SCP) (if using SSH to access the
Bridge Module). The switch has the ability to store the location of the firmware
files for future upgrades. Additionally, the Firmware functional group includes
commands for viewing the current firmware revisions and for changing the
boot image.
1-2
Read and write Access.
Reboot access.
Can change operator and administrator passwords.
Can disable user login and passwords. This would allow all users
admin-level access without the need for a user name or password.
Can view all current user sessions
Can access all of the commands executed from any open operator
session.
Can log out any open user sessions
Can send messages to the open user sessions
D000103-000 E