Qlogic 12000 Series Reference Manual page 84

Switch Command Line Interface
Groups and Commands
NOTES: The subnet manager must be running to display this information.
smNonRespDropSweeps
Displays the sweeps to wait before dropping a non-responsive node.
Syntax:
smNonRespDropSweeps
Options:
None.
Sample Output:
-> smNonRespDropSweeps 3
Set Nonresponsive node drop sweeps to: 3 sweeps
-> smNonRespDropSweeps
Non-responsive node drop sweeps: 3 sweeps
NOTES: The subnet manager must be running to display this information.
smLogLevel
Displays or dynamically sets the Subnet Manager logging level.
Syntax:
smLogLevel [<loglevel>]
Options:
loglevel
logging level 1-7
Sample Output:
-> smLogLevel 4
NOTES:
Levels: 1=WARN+, 2=INFINI_INFO+, 3=INFO+, 4=VERBOSE+, 5=DEBUG2+,
6=DEBUG3+, 7=TRACE+.
The subnet manager (SM) must be running to use this command. Changes made
with this command will only affect the currently running SM, and will be forgotten if
the FM is restarted or the chassis is rebooted. To make persistent changes edit the
FM XML configuration file.
1-76 D000103-000 E