Options:
slotnumber
The chassis slot numberto update.
[host]
The name of the host where the firmware file resides.
[user]
The FTP user name.
[password]
The FTP user password.
[dir]
After logging in, the directory to cd to.
[filename]
The name of the firmware file.
Sample Output:
-> fwUpdateSlot 1
Enter 1 for FTP, 2 for local file: 1
Ftp Server IP Address:[192.168.0.195]
Ftp username:[ftp] xxxxx
Ftp password:[ftp] xxxxx
File Directory:[PATH TO FIRMWARE FILE]
File name:[xxxx.pkg]
NOTES: Firmware update works by using ftp to retrieve the firmware file, then writes
the file to flash. Omitting any of the options causes the user to be prompted for the
information.
fwUpdateChassis
Updates the firmware for all cards in a chassis of a particular type, or everything.
Syntax:
fwUpdateChassis (all,management,evic, fvic) [noprompt]
[reboot]
Options:
(all,management,evic, fvic)
Type of card to update. See notes for details.
[noprompt]
Will not prompt the user for ftp information (uses the saved values).
[reboot]
Upon successful completion, reboots the updated cards .
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-53