Network - Qlogic 12000 Series Reference Manual

Network

ifShow
Displays information for all the network interfaces for the switch, including the management port and
the internal Ethernet network.
Syntax:
ifShow [ifName]
Options:
[ifName]
The network interface name.
Sample Output:
-> ifShow
sbe0 (unit number 0):
Flags: (0x8063) UP BROADCAST MULTICAST ARP RUNNING
Type: ETHERNET_CSMACD
Internet address: 192.168.100.9
Broadcast address: 192.168.111.255
Internet address: 172.26.3.19
Broadcast address: 172.26.15.255
Netmask 0xfffff000 Subnetmask 0xfffff000
Net 0xc0a86000 Subnet 0xc0a86000
Ethernet address is 00:06:6a:01:99:c8
Metric is 0
Maximum Transfer Unit size is 1500
2524301 octets received
6604130 octets sent
28728 packets received
14310 packets sent
19665 broadcast packets received
31 broadcast packets sent
0 multicast packets received
0 multicast packets sent
NOTES: This routine displays the attached network interfaces for debugging and
diagnostic purposes. If ifName is given, only the interfaces belonging to that group
are displayed. If ifName is omitted, all attached interfaces are displayed.
routeShow
Displays the OOB LAN IP routes.
Syntax:
routeShow
D000103-000 E
Switch Command Line Interface
Groups and Commands
1-39