Add Groups To A Security Set; Remove Groups From A Security Set; Activate A Security Set; Deactivate A Security Set - Qlogic SANbox 5000 Series Interface Manual

A
9.5.5

Add Groups to a Security Set

Enter the
the following example:
SANbox (admin-security) #> securityset add securityset_1 group_isl group_port
9.5.6

Remove Groups from a Security Set

Enter the
shown in the following example:
SANbox (admin-security) #> sescurityset remove securityset_1 group_isl group_port
9.5.7

Activate a Security Set

Enter the
the following example:
SANbox (admin) #> securityset activate securityset_1
9.5.8

Deactivate a Security Set

Enter the
and disable security in the fabric:
SANbox (admin) #> securityset deactivate
59183-01 A
Securityset Add command to add a group to a security set as shown in
Securityset Remove command to remove groups from a security set as
Securityset Activate command to apply security to the fabric as shown in
Securityset Deactivate command to deactivate the active security set
9 – Device Security Configuration
Managing Security Sets
9-11