Rename A Security Set; Copy A Security Set; Add Groups To A Security Set; Remove Groups From A Security Set - Qlogic SANbox 5802V Interface Manual

A

Rename a Security Set

Enter the
following example:
SANbox (admin-security) #> securityset rename securityset_old securityset_new

Copy a Security Set

Enter the
new security set as shown in the following example:
SANbox (admin-security) #> securityset copy securityset_1 securityset_2

Add Groups to a Security Set

Enter the
the following example:
SANbox (admin-security) #> securityset add securityset_1 group_isl group_port

Remove Groups from a Security Set

Enter the
shown in the following example:
SANbox (admin-security) #> sescurityset remove securityset_1 group_isl group_port

Activate a Security Set

Enter the
the following example:
SANbox (admin) #> securityset activate securityset_1

Deactivate a Security Set

Enter the
and disable security in the fabric:
SANbox (admin) #> securityset deactivate
59263-01 A
Securityset Rename command to rename a security set as shown in the
Securityset Copy command to copy a security set and its contents to a
Securityset Add command to add a group to a security set as shown in
Securityset Remove command to remove groups from a security set as
Securityset Activate command to apply security to the fabric as shown in
Securityset Deactivate command to deactivate the active security set
9 – Device Security Configuration
Managing Security Sets
9-11