Quick Start - HP 7102dl - ProCurve Secure Router Configuration Manual

Configuring Multicast Support for a Stub Network

Quick Start

12-26
Quick Start
This section provides the commands you must enter to quickly configure
support for multicasting.
Only a minimal explanation is provided. If you need additional information
about any of these options, check "Contents" on page 12-1 to locate the section
that contains the explanation you need.
If you so choose, you can print and fill out Table 12-3 with information for your
network. You can then use this worksheet to complete the quick start com-
mands.
Table 12-3. Multicast Settings
Information Required
multicast router (helper
address)
downstream interfaces
upstream interfaces
IGMP version
Setting
IP address
interface ID:
• Ethernet interface
– <slot>
– <port>
• WAN interface:
– <interface type>
– <interface number>
interface ID:
• Ethernet interface
– <slot>
– <port>
• WAN interface:
– <interface type>
– <interface number>
1 or 2
Your Setting