Configuring Qos On An Ethernet Interface - HP 7102dl - ProCurve Secure Router Configuration Manual

Setting Up Quality of Service
Quick Start
8-78

Configuring QoS on an Ethernet Interface

1. Move to the Ethernet interface configuration mode context and enable
rate limiting:
Syntax: traffic-shape rate <bps>
2. If you want the Ethernet interface to implement CBWFQ or low-latency
queues, configure the QoS map as described above.
3. Apply the QoS map to the Ethernet interface. From the Ethernet interface
configuration mode context, enter:
Syntax: qos-policy out <mapname>