Troubleshooting Web Content Filtering; Troubleshooting Tools-Show, Debug, And Clear Commands - HP 7102dl - ProCurve Secure Router Configuration Manual

workstations until it knows that access to them is allowed. While waiting for
the Websense server's decisions, the router buffers the external Web servers'
responses. At any one time, the ProCurve Secure Router can buffer up to 100
responses.
You can set the number of buffered responses using this global configuration
mode command:
Syntax: ip urlfilter max-response <value>
Specify a value between 1 and 100. The default is 100.

Troubleshooting Web Content Filtering

Malfunctioning Web content filtering can have drastically different symptoms:
users may continue browsing inappropriate materials, or users may lose
access to the Internet entirely. Both problems are critical although the second
is often the more immediate and noticeable.
You might also receive complaints about less extreme problems:
When a user tries to navigate to a new Web site, the Web page does not
load or loads very slowly.
Users cannot access certain Web sites or portions of Web sites that they
think that they should.
In this section, you will first learn about the show and debug commands that
make up your troubleshooting tools. You will then learn about resolving the
common problems discussed above.
Troubleshooting Tools—show, debug, and clear Commands
The ProCurve Secure Router OS provides several show commands related to
Web content filtering. Table 7-1 displays the information returned when you
enter each command.
Content Filtering
Troubleshooting Web Content Filtering
7-11