HP 7102dl - ProCurve Secure Router Configuration Manual page 1026

Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Virtual Private Networks
N o t e
16-112
You specify the first and the last address in a range when configuring addresses
for remote users from this window. This configuration is different from that
in the VPN wizard, where you specify the network IP address and subnet mask.
9. Move to the Step 5 of 5: Add/Modify/Delete Policy Entry window. Click
the Add New VPN Selectors button.
Figure 16-87. Specifying the Local and Remote Networks for a Client-to-Site VPN
10. A new window displays, in which you can configure the VPN connection
to include the network containing addresses for the remote client. Leave
the Filter type at the default, permit, and the protocol at the default, any.