Vpn Peers; Adding A Second Remote Site To The Vpn - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Virtual Private Networks
16-102

VPN Peers

The VPN Peers window allows you to add new VPN connections. You can also
alter IKE and IPSec SA parameters. The window should display when you
close the VPN wizard. You can also access the window by selecting VPN Peers
under VPN in the left navigation bar.

Adding a Second Remote Site to the VPN

The VPN wizard only allows you to configure a connection to a single VPN
peer at a time. You can add a connection to another site (or to mobile clients)
in two ways:
Run the VPN wizard again.
Select Create New VPN Peer in the second window of the Create VPN
Peers window.
When you use the second option, the interface allows you to select a policy
from a pull-down menu on which to base the new policy. This option saves
you time by automatically importing all the configurations from the policy
you select.