Viewing Lldp Neighbors - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Figure 16-110. Enabling and Disabling LLDP on an Interface
1. In the navigation bar, select LLDP under System.
2. Move to the Enable LLDP on Specific Interfaces window, which includes
a list of all Ethernet and logical interfaces active on the router.
3. By default, all interfaces can both transmit and receive LLDP messages:
a. To restrict an interface from participating in LLDP, deselect the Tx/Rx
box by its name.
b. To allow an interface to receive messages but not send them, select
the Rx box by its name.
c. To allow an interface to send messages but not receive them, select
the Tx box by its name.
4. Click Apply.
5. Again, clicking the Reset button returns settings to those established the
last time you clicked Apply.
You can view how many messages each interface has transmitted and received
in the TX Count and RX Count columns.

Viewing LLDP Neighbors

The LLDP window includes an LLDP Neighbors section, which displays every
neighbor for which the router has received LLDP information, listed by their
system name.
By scanning LLDP information, you can determine what devices the router
can reach on the LAN—and whether any unauthorized devices have contacted
it. You can also view the MAC address and IP address at which neighbors can
be reached.
Configuring LLDP
16-143